i bent my lawn mower blade?

can i just get the blade replaced, or do i have to buy a whole new lawn mower?
well,
the whole shaft is broken
from hitting the curb.
ugh sooooo gay.

Comments

6 Responses to “i bent my lawn mower blade?”
  1. ca5050 says:
    June 27, 2009 at 12:39 pm

    You can get the blade replaced, if you take it to a place that fixes lawn mowers. Better to take the whole thing down there, and let them deal with it.

  2. chilicooker_mkb says:
    June 27, 2009 at 12:39 pm

    Replace the blade. And while you're at it…replace your boyfriend…he should be mowing the grass anyway.

  3. thewrangler_sw says:
    June 27, 2009 at 12:39 pm

    Replace the blade.

    You can do this yourself, or get a friend to do it.

    Blades are mounted with a nut that is screwed on backwards usually…. so, where you would normally turn a nut to the right to tighten it… on a blade, you would turn it to the left to tighten it. Use a long wrench, and a pair of heavy gloves. If necessary a clamp can be used to hold a block against the deck, which can act as a 'stop' for the blade to rest against, making it easier to loosen the nut.

    Good Luck

  4. luka says:
    June 27, 2009 at 12:39 pm

    get a new blade.

  5. Bart S says:
    June 27, 2009 at 12:39 pm

    The blade can be replaced, but that may not be all of the problem. The crankshaft may also be bent. If this is the case, it will cost about 150 to 200 to replace the crankshaft and blade.

  6. jersey city Joe says:
    June 27, 2009 at 12:39 pm

    if you bent the shaft going up to the motor get a new mower.


 
Powered by WordPress Lab